Testar Australia is a technical assistant dealer for Avalon Instruments. Our staff has been trained at the Avalon Instruments factory to provide assistance, repairs and maintenance on their products.
The Avalon M-ZERO has been designed to revolutionize the world of portable astronomy. The unique and innovative design, the light weight and small dimensions, greater versatility and high quality make the M-Zero the perfect portable mount.
Several mounts in one
The M-Zero mount is a versatile and compact mount for visual astronomy and astrophotography. For astrophotography it can be configured as a standard equatorial mount or a single arm fork mount while for visual observation it can be configured in alt-azimuth mode.
Double Telescope Setup
With the Dual-DEC system, you can install a second telescope on the opposite side of the declination axis. Considering this capability it is possible to use a great range of optics starting from a small refractor up to a double setup with a total weight of 12-13 kg. Avalon offers a vast range of accessories that can be connected with the Dual-DEC system such as Vixen saddles, Losmandy Saddles or the X-Guider.
Meridian flip, something of the past.
As for the Linear, the motion transmission technology is based on pulley-tooth belt without play while its geometry makes the imaging easy at the meridian without having to wait for the object to cross the meridian. It works particularly well for objects such as the Andromeda Galaxy, M27 or M33 that reaches a maximum elevation of just a few degrees above the horizon, capturing that time is limited and it should not be wasted on the meridian flip routine.
Why using counterweights if the mount itself can be a large counterweight? That is the concept behind the Avalon M-Zero mount: shift all the mount mechanism on the counterweight side and reduce the dead weight to be carried. The declination axis can be quickly balanced like in an equatorial mount, while for the RA axis there is a small 0.5kg counterweight that can be placed in different positions.
The M-Zero total weight is only 12 kg with the tripod (included) and in terms of lightness and transportability, it ranks at the top of the lightest mounts with capacity up to 8/10 kg.
No gears for high guiding performance
Different from other mounts, the Avalon M-Zero has such a low guiding RMS error that it makes astrophotography possible with telescopes with focal length up to 2m such as the Schmidt Cassegrain 8" f/10.
The majority of telescope mounts employ a worm drive gear system. This system however may produce a poor guiding performance due to mechanical errors in gears such as periodic error, rough gear surfaces and a play between gears (backlash).
- Periodic error: it is caused by the eccentricity of the worm gear in right ascension which has to turn constantly in order to compensate the Earth's rotation. While the guiding system tries to reduce the periodic error, it will never disappear completely due to its short period and its high amplitude. As a result, the tracking accuracy in right ascension will be always poorer than in declination. The Avalon fully belt driven system produces a periodic error with such a long period that your guiding system will always be capable to correct it and therefore delivering high performance guiging results.
- Gears roughness: gears are made of metal and while the grease reduces friction and wear, rough spots on the gear surfaces generate sudden tracking movements (spikes). When a guiding graph shows a sudden spike, your photo is most likely ruined or the stars in your photo will look ovalized. The effect is similar to wind gusts that do ruin your shots. Avalon does not use gears so the guiding performance is strikingly high!
- Backlash: in mounts driven by gears, backlash is caused by a gap between the gear teeth and it causes a play and consequently a delay in the guiding responsiveness. Some mounts allow a backlash compensation, producing a quick acceleration of the gears until the gear teeth touch and then transmit the rotation. However, the backlash varies along different points of the worm drive and generally also increases overtime. Avalon and its fast reverse technology produce an immediate guiding response as the system employs pulleys that do not suffer of backlash.
Pulleys and toothed belts, zero backlash!
This choice has allowed to obtain several advantages: a very steady motion without play (no backlash) or sudden peaks, which are factors of paramount relevance for long guided exposures and during high magnification visual observations. These features are of particular relevance especially for the declination axis motor which can now quickly reverse the motion without breaks to recover the plays: hence the mount name FAST REVERSE. The toothed belts used in the M-Zero have the structure made of special material with steel strands to avoid any deformation, elongation and stress, much better than those used in the automotive engine distribution system (which are generally made of rubber with nylon strands). Comparing the service time for the automotive toothed belts, which is around 100.000 km, assuming a medium regime of 2.000 rpm and thermal stress from 0 to 90°C in a few minutes, we can assure that the life cycle of the m-Uno toothed belts will be extremely long!
It is important to point out that in the gear-worm systems the motion transmission has only one tangent point of contact; any error on each of the two components will sooner or later result in a tracking error.
In the pulley-toothed belt system, no direct contact occurs and the motion is transmitted by the belt, engaging from 50% to 90% of the girth surface. Consequently, any eventual error present is averaged among the cogs and greatly reduces the tracking error.
No wear, no friction!
No wear since no relevant friction occurs. In fact, all the pulleys and the axes rotate on roller bearings allow to reduce the total friction almost to zero.
Another significant advantage of very low friction is that the risks of motor slipping during GOTO operation is virtually nil.
On the contrary, it is well known how difficult it is to regulate the coupling between gear and worm in conventional mounts. If the coupling is tight, the motors can get stuck with consequent loss of the position, if the coupling is too loose the play increases.
On the other hand, the absence of significant play in the M-uno makes the initial calibration quick and easy.
No lubrication, no maintenance!
Since there are no gears, there is no need for periodical lubrication of the internal components and therefore the maintenance is much reduced and limited to the external cleaning.
it can be performed using the polar scope mounted on the RA body that can be rotated (as shown in the picture above) to the upper position for a comfortable adjustment of the Polar Alignment.
The standard kit includes:
2. Support stand provided of scope fixing knobs and dovetail attack with fixing grip knob.
3. Illuminator cap provided of red LED and connection cable to the StarGO.
Single arm fork equatorial mount / equatorial mount / Alt-azimuth mount
8 kg for imaging, 10 kg in visual mode
12kg including the tripod
Four stages belts drive system
CNC anodized aluminium
|StarGO GoTo Control System (WiFi or Bluetooth)|
|SkyWatcher polar scope (optionally Losmandy model)|
|2 years (5 years for the belts)|
- Single Fork Equatorial mount,
- Vixen Style dovetail saddle
- Mini counterweight bar
- 0.5kg kg counterweight
- Tripod T-Pod 90
|Avalon M-Zero manual|
In order to download mount firmware & StarGo software:
1. Register for an account on the Avalon Instruments website.
2. Once registered, log into the support page.
3. Next to the "Manuals" tab, the "Software and App" tab will appear - click on this to find the firmware and StarGo downloads.
The StarGO is a Computerized GoTo Control System is based on stepper motor technology. It has been manly design for the M-Zero, M-Uno and Linear mounts but thanks to the programmable Gear Ratio and the special motor kit, it can be easily used with mounts of other brands.
Its design follows the most recent technological development in this field, consisting in realising a very simple hardware characterized by a large field of applications such as the management of focusers, filter wheels, DSLR cameras and so on. It is controllable by a PC, smartphones and tablets.
The StarGo features:
- The Control Box that can be embedded in the mount as for the Avalon Linear and M-Uno, or in a separate control box for the M-Zero (and for its use with all other compatible third party mounts). It performs all the communications with specific components (Focuser, DSRL camera, and other auxiliary devices) using direct connections with Windows and Mac computers via USB. The wireless Wi-Fi and Bluetooth capability is also integrated in the control box to interact with intelligent devices such smartphones, tablets and, again with Windows and Mac computers.
- The StarGo Keypad allows the control of the mount, perform almost all the available and most needed operations.
- The StarGO software, entirely developed by Avalon Instruments, uses a computer to perform all the setup and management operations, including the control of various external equipment that can be connected to the control box.
The X-Solver is an application based on the Plate Solve solution. With X-Solver it is possible to build Sky Model till 24 stars that can be saved and used later even during other night sessions.
With X-Solver application comes two very useful tools: the Sky Model and Polar alignment.
The Sky Model allows to easily build a sky model with up to 24 stars. The tool provide an intuitive GUI that shows a 2D representation of the sky that can be designed from the user simply by the mouse double click.
The modelling function is particularly useful in fixed observatory installations, however for the speed of its execution, it may be used also for mobile installations, especially for visual observation (after a short period of CCD use at the very beginning of the session).
The Polar Align is a tool for a fast and easy Polar Alignment by using the Plate Solve function.
- The StarGO-BT application for Android devices that allows to interface them with the StarGO control box via Bluetooth connection. With this application the Android devices become like a control pad. This application, as well as the PC StarGO, is under continuous development to add new functionalities. Only for Bluetooth mounts.
- The AvalonStargo ASCOM driver that makes possible the interaction between the StarGO Control Box and the most used astronomical software applications such as Phd2, TheSkyX, SNPP7, Maxim, SGP, CartduCiel, Stellarium, etc.
In this video it is possible to watch how the StarGO Ascom Driver is able to manage several astronomical softwares connected at the same time: