Astronomy Specialist

12V 5A CAMERA POWER SUPPLY 5.5-2.1

$59.00 AUD
SKU: TE-PSU12V5A-2.1

Testar


 

12V DC 5A power supply for cameras and other accessories with a 5.5-2.1 output plug and IEC AC input cable. Fully Australian certified - unlike many generic power supplies that come with overseas products, this is fully compliant with all safety certifications!

 

 

Testar 12V 5A Camera Power Supply Certifications

 

Input voltage 90 - 264VAC
Input current 1A / 230VAC
Output voltage
12V
Output current
5A
Rated output power
60W
Output connector
2.1mm DC barrel jack, centre-positive
Efficiency
89.5%
Operating temperature range -30 to +70º C
Approvals AS/NZS, RCM, CE, UL, CCC, FCC, TÜV, PSE, KCC, EAC
Protections Short circuit, overload, over-voltage, over-temperature
No load power consumption <0.075W
Max ripple & noise 120mV p-p (measured at 20MHz using 12" twisted pair terminated with a 0.1μF & 47μF capacitor)
Output cable length 1m
Input cable length 1.8m
SKU TE-PSU12V5A-2.1

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
J
John Holgate
Needs longer cable

Seems well made, doesn't get hot (though I haven't pulled 5 amps out of it) and all fittings seem secure. But the 12v cable really needs to be a couple foot longer. As it is, with the power supply level with the base of the mount, the cable stretches straight out to the camera on a refractor - if it was a couple of foot longer, you could run it straight up the mount then along the scope to avoid a cable hanging in space. With 5 amps of capacity, it would also be great if it was supplied with a splitter if you wanted to power your mount and your camera/dew heater etc. It's good, but with a little extra, could be really good :) Should be excellent with an ASIair.